Zirconium oxide, chemical nomenclature ZrO2, is a material that is characterized by an increasing ability of the crystals to fracture as the temperature and pressure on the treated surface increase; this physical property offers zirconium oxide the advantage of being a self – sharpening abrasive: the breaking of the grains during processing guarantees the continuous production of new sharp and abrasive cusps. This quality makes it a very suitable material for use in the satin finishing of stainless steel and in the calibration of wood.
|ITEM||COLOUR||GRIT||WIDTH Cm.||LENGTH Mt.||WEIGHT Kg/m2||ELECTROSTATIC SYSTEM SPRAY||STANDARD SPRAY||POLYAMIDE||MINERAL|
|ZC||LIGHT BLUE||80||150||30 o 40||2,1||X||6.6||ZIR|
|Non-Woven tissue made in zirconia grit 80, It shows a good rigidity, given by a pre bond of polyamide combined to an abrasive with medium-coarse grit. Converted in cut discs, flap wheels, cylinders it is used in the metal sector to remove burring, cleaning and very marked satin-finishing.|
|ZM||LIGHT BLUE||120||150||30 o 40||1,9||X||6.6||ZIR|
|Non-Woven tissue made in zirconia grit 120. It shows a good rigidity, given by a pre bond of polyamide combined to an abrasive with medium-coarse grit. Converted in cut discs, flap wheels, cylinders it is used in the metal sector to remove burring, cleaning and very marked satin-finishing.|
|Non-Woven tissue made in zirconia grit 180. Mostly used in the metal sector converted in flap wheels, cut discs and cylinders for the finishing phase of the silking on stainless steel.|
|Non-Woven produced in white aluminium oxide grit 240. This grit gives to this tissue a particular capacity of polishing in a way both soft and effective.It is used when is required an uniform finishing and not excessively aggressive. It is used to be converted in pads and in flap wheels for the polishing of the soaked paintings, nitrate paintings and cellulose nitrate paintings, not covering polyurethane paintings etc...|